PUSH 1-10v 50W DALI Dimmable LED Driver 250mA - 700mA / LED Street Light Driver ML50C2-PDV manufacturer from China Shenzhen Merrytek Technology Company

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: ML50C2-PDV

2x25W 250mA-700mA DALI & 1-10v And PUSH Dimmable LED Driver, 123x79x23.5mm

Des

2x25W 250mA-700mA DALI & 1-10v And PUSH Dimmable LED Driver, 123x79x23.5mm

Description:

1, Built-in DALI interface and push dimming function .

2, Secondary dimming with 1-10v interface

3, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207

4, Multi output current 250mA to 700mA selectable via DIP switch.

5, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.

6, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.

7, Maximum length of the cable, from push button to last driver is 20m

8, Press-in terminals in primary and secondary side, easy assembly

9, Protection: Short circuit / Over voltage / Over temperature

10, 5 years guaranty

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Input current	0.16A max
	Power factor	≥0.90
	Efficiency(Note1)	≥85%
	Leakage current	0.5mA/240Vac
OUTPUT	Output current and load	250mA 16~60V DC 2x15W max 350mA 16~60V DC 2x21W max 400mA 16~60V DC 2x24W max 450mA 16~60V DC 2x25W max 500mA 16~50V DC 2x25W max 550mA 16~46V DC 2x25W max 600mA 16~42V DC 2x25W max 700mA 16~36V DC 2x25W max
	Output load range	2x25W max
	Current accuracy	±5%
	Dimming mode	DALI, PUSH,1-10v
ENVIRONMENT	Working temp.(Ta)	-20~50
	Surface temp.(Tc)	85max
	Working humidity	20~90%RH non-condensing
	Storage temp.	-40~80
	Life time	≥50000hours
PROTECTION	Isolation class	Class II, SELV
	Protection class	IP20
	Short circuit	Protection type; auto rest
	Over voltage	Protection type; auto rest
	Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13
	EMC	EN55015, EN61000-3-2ClassC
	EMC	EN61000-3-3, EN61547
	DALI interface	IEC62386-101, IEC62386-102, IEC62386-207
	Approvals	CE
	Withstand voltage	IN-OUT:3.75KVAC/5mA/1min
NOTE	1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp.